1.Rigid material-vise body of ductile iron FCD60JIS (equal to GGG60) with 60 kgs/mm2 or 80,000 psi tensile strength.
2.The slide ways are heat treated to HRC 45° and that can provide the high accuracy and long service life.
3.Fixed Height, EV vises can be used 2 or more together.
4.EV vise is suitable for CNC Vertical & Horizontal Machine Center.
5.Exchangeable jaws: quick & easy replacement.
6.Step Jaws are optional.

1.Rigid material-vise body of ductile iron FCD60JIS (equal to GGG60) with 60 kgs/mm2or 80,000 psi tensile strength.

2.The slide ways are heat treated to HRC 45° and that can provide the high accuracy and long service life.

3.Fixed Height, EPV vises can be used 2 or more together

4.EPV vise is suitable for CNC Vertical & Horizontal Machine Center.

5.Exchangeable jaws: quick & easy replacement. 6.Step Jaws are optional.

1.Special device its can clamp two different size of workpiece at the same time.
2.Take apart fixed block from the vise center so as to clamp larger workpiece.
3.Tool vise.

1.9.5” large opening.
2.Spindle nut does not exceed the end of main body and do not occupy the space.
3.Height of main body within 73.025 ± 0.013mm.
4.Material of AD series:FCD.

1.One piece casting of vise bed and flexed jaw.
2.Down thrust "Semis-sphere Segment" mechanism-eliminates jaw lift and work tilt.

Max. Opening Precision Angle Lock Vise.
Max. Jaws Opening:
LVA-160:335mm
LVA-200:360mm
LVA machine vise with big opening suited to clamping large workpiece for machining.

A：With the ability of lock-fixed III 2,3,4,5...
B：Use the semi-sphere segment principle.
C：When operate several vises(in a row) put on one maching bed, the using

1. The vice-plate position will be varified and increased the useage range according to the following.
2. The bed of vice is treated with hardness and the plate with heat and grinding.

1. Body, movable jaw and swivel base made of close-grained high tensile iron casting. Built for heavy dute machining and retained accuracy.
2. Jaw plates of hardened and ground tool steel.
A-Type milling vise is used for drilling、milling and cutting of machining method.

1.Vice body made from high grade iron for rigidity.
2.Low overall height.
3.Moving Jaw runs in long prismatic slides with provisiion for wear adjustment.
A-Type milling vise is used for drilling、milling and cutting of machining method.

1.Stationary front jaw.

2. The back jaw moves along with the slide reducing the tendency towards deflection preventing the workpieces from tilting.

3.Jaws and body are steel construction.

1.Stationary front jaw.

2.The back jaw moves along with the slide reducing the tendency towards deflection preventing the workpieces from tilting. 3.Jaws and body are steel construction.